- Activa Perma Stone
- Measuring Spoon
- Warm Water
- Mixing Container
- Flexible Plastic Frame Mold
- Fine Sand Paper
- Metalic Spray Paint
- Canvas Panel
- Double Sided Tape
Mix compound according to package directions.
Add 1.5 parts Perma Stone into 1 part water in a clean, disposable mixing container or bag.
Mix gently and slowly until a pancake batter consistency is reached.
Pour the Perma Stone mixture into the prepared mold. Gently tap or vibrate the mold to release any air bubbles.
Allow the Perma Stone to dry. Average setting time is approximately 20-30 minutes.
Loosen the casting from the mold by gently pulling back on the mold’s edges.
Lift the casting completely out of the mold.
File down any rough edges of the frame using sand paper or file.
Brush or spray paint the Perma Stone frame the desired color.
Use a matching sized canvas panel as a backing for the frame. Frame can be used to hold a photo or artwork.
Insert photo or artwork into the frame and secure in place with double sided tape.